China fiber optic connector for industrial control multi mode fiber Manufacturers Factory Suppliers

V-Pin Wind Cable Connector Assembly

V-PIN industrial control optical fiber patch cord uses HPCF200/230 optical fiber, which has low loss and excellent broadband performance. It is also strong and easy to operate.

HD Video Optoelectronic Components

Our company specializes in the production of high-definition camera cable assemblies. Connector using Switzerland LEMO original 3K.93C connector, composite cable using the United States BELEDN and

Fiber Optic Connector Adapter

Optical fiber connectors of different interface types can be inserted into both ends of the optical fiber adapter to realize conversion between different interfaces such as FC, SC, ST, LC, MTRJ, MPO,

SC Fast Fiber Optic Connector (Cold Connector)

The fiber optic cold splice is used when two pigtails are butted together. Its main internal component is a precision v-shaped groove.

SC Optical Fiber Active Connector

SC is one of the most common connected devices in single-mode network devices, and is commonly found on optical terminals. It uses a 2.5mm ceramic core, which is different from ST or FC connectors

Medical Spectrum Detection Component

Due to the softness, small size, light weight and high sensitivity of the optical fiber, the optical fiber has a wide range of medical applications. Due to the uniqueness of fused silica, the laser

460nm-680nm PM Connector

Polarization-maintaining optical fiber jumper (pigtail) is a type of optical fiber connector. One or both ends use standard optical fiber movable connectors. Polarization-maintaining fiber is used

PM Dispersion Compensation Fiber Patch Cord

Polarization-maintaining (PM) dispersion compensating fiber jumpers are made of dispersion compensating fiber (DCF) and are suitable for applications that require precise control of system dispersion.

HD Video Optoelectronic Components

3K series high-definition video photoelectric components adopt 2-light 4-point transmission mode, 2 power lines (20AWG) for HDTV camera power supply, 2 signal control lines (24AWG) and 2 single-mode

Plastic Optical Fiber Connector

POF is mainly used in low-speed, short-distance transmission, and has good prospects for development in industrial control bus systems and the Internet, with the advantages of high transmission

SMA905 Fiber Optic Connector

SMA905 fiber optic connectors, also known as FSMA connectors, are widely recognized in the industry for fiber optic interconnection systems. Widely used in military, industrial and medical

Wind Power Cable Assemblies

It is mainly used in BACHMANN wind turbine fiber optic communication system, between wind turbines, engine control and tower bottom control.