SC Optical Fiber Active Connector

Description

Product Description

SC is one of the most common connected devices in single-mode network devices, and is commonly found on optical terminals. It uses a 2.5mm ceramic core, which is different from ST or FC connectors and is a plug-and-pull device that does not require rotation, that is, a clip-on square interface. SC SC is an abbreviation for Square Connector. Its shape is rectangular, this kind of connector is affordable, easy to plug and remove operation, small fluctuation of intervention loss, high compressive strength, high installation density, and is widely used.

Features

● High stability and reliability.
● Low insertion loss, high return loss.
● Excellent finish grinding standards.
● End face geometric parameters conform to GR-326Core.
● Diameter 0.9, diameter 2.0, diameter 3.0 Single or double fiber cable optional.

Applications

● Telecommunications network
● Cable TV
● Gigabit Ethernet
● Active or passive device terminals
● Industrial, Medical and military

Single fiber cable jumper

Twin-core parallel cable jumper

Product Parameter

Category	Indicators
End requirements	400X meets IEC 61300-3-35 standard
Insertion loss	≤0.3dB
Return loss	≥45dB(SM, PC);≥60dB(SM,APC)
Repeatability	≤0.2dB
Core type	PC, UPC, or APC Suspended Optional
Sheath	0.9Hytrel, 2.0/3.0mm PVC, armored air pipe, etc
Operating temperature	-40℃ ~ +85℃
Executive standard	YD∕T 1272.3-2015