China fiber connector in power communication Manufacturers Factory Suppliers

MU Fiber Optic Active Connector

The MU connector is based on the most commonly used SC connector. Its connector size is about half that of the SC connector and it adopts a push-pull design.

Fiber Optic Connector Adapter

Optical fiber connectors of different interface types can be inserted into both ends of the optical fiber adapter to realize conversion between different interfaces such as FC, SC, ST, LC, MTRJ, MPO,

Optical Fiber Pigtail And Patch Cord

Low insertion loss. Ultra low return loss. Multiple connector types available

ST Optical Fiber Active Connector

ST Optical fiber connector ST is the abbreviation of Stab&Twist, the shell is round, and the fastening method is plug-in card type, that is, card type circular interface.

SC Optical Fiber Active Connector

SC is one of the most common connected devices in single-mode network devices, and is commonly found on optical terminals. It uses a 2.5mm ceramic core, which is different from ST or FC connectors

LC Fiber Optic Movable Connector

The LC connector is a compact fiber optic connector known for its small form factor (SFF), with a size approximately half that of traditional SC, ST, or FC connectors. Its space-saving design makes

E2000 Fiber Connector

The E2000 connector series are fiber optic connectors with spring-loaded gates that protect the pins from dust and wear. When the connector is pulled out, the gate closes automatically to reduce

12-core Multimode Fiber Patch Cord

It supports 40G/100G network connection, has high density and high precision, saves wiring space, greatly improves the convenience of network maintenance, and is widely used in backbone networks,

12-core MPO OM3 Fiber Connector

It supports 40G/100G network connection, has high density and high precision, saves wiring space, greatly improves the convenience of network maintenance, and is widely used in backbone networks,

12-core Fiber Patch Cord

Suitable for direct connection and high-density wiring of various high-density applications, 40GBASE-PLR4 QSFP+ and 100GBASE-PSM4 QSFP28.

OM4 Fiber Patch Cord

Save wiring space and reduce deployment costs.

Single And Multi-mode Mode Conversion Fiber Optic Patch Cord

Single-to-multimode conversion fiber optic patch cords utilize both single-mode and multi-mode optical fibers to enable single-mode signals to be sent correctly through multi-mode networks.