Single And Multi-mode Mode Conversion Fiber Optic Patch Cord

Single-to-multimode conversion fiber optic patch cords utilize both single-mode and multi-mode optical fibers to enable single-mode signals to be sent correctly through multi-mode networks.

Send Inquiry

Download

Description

Product Description

Single-to-multimode conversion fiber optic patch cords utilize both single-mode and multi-mode optical fibers to enable single-mode signals to be sent correctly through multi-mode networks. Can be used for 1000BASE-LX/LH and 10GBASE-LRM optical modules transmitting in the 1300nm window and applied to multi-mode equipment. Mode conversion optical fiber jumpers are mainly used in optical fiber communication systems where mode field conversion is required between optical equipment or between optical networks and optical equipment. After mode conversion and adjustment by power amplifiers and other equipment, the required optical fiber is obtained. Mode field signal. Mode field conversion jumpers are mainly used to convert between single-mode (SM: 9/125um) and multi-mode (MM: 50/125um or 62.5/125um) and are produced in the form of jumpers.

Single and multi-mode mode conversion fiber optic patch cord

Features

Different connector colors, easy to distinguish .
High-quality welding and termination technology, with low insertion loss.
Centerline offset splicing to avoid differential mode delay effects.
Good repeatability and interchangeability, stable optical performance .
Reduce modal dispersion and increase transmission bandwidth.

Applications

Interconnection of optical links in optical active equipment
Interconnection of single-mode and multi-mode equipment
Backbone communication network and data center

Single and multi-mode mode conversion diagram

Parameters

Category	Indicator requirements
End face requirements	400X meets IEC 61300-3-35
Insertion loss	≤0.3dB (connector)
Coupling power ratio	12dB≤CPR≤20dB
Durability	>1000 times
Jacket	2.0/3.0mm PVC, armored empty pipe, etc. optional
Operating temperature	-40℃ ~ +85℃
Implementation standards	YD_T, IEC, Telcordia