China fiber connector for fiber optic smart grid network Manufacturers Factory Suppliers

E2000 Fiber Connector

The E2000 connector series are fiber optic connectors with spring-loaded gates that protect the pins from dust and wear. When the connector is pulled out, the gate closes automatically to reduce

Fiber Optic Active Connector

Fiber optic movable connectors, also known as fiber optic patch cords, precisely butt the two ends of the fiber with extremely low insertion loss.

Fiber Optic Connector Adapter

Optical fiber connectors of different interface types can be inserted into both ends of the optical fiber adapter to realize conversion between different interfaces such as FC, SC, ST, LC, MTRJ, MPO,

SC Fast Fiber Optic Connector (Cold Connector)

The fiber optic cold splice is used when two pigtails are butted together. Its main internal component is a precision v-shaped groove.

SC Optical Fiber Active Connector

SC is one of the most common connected devices in single-mode network devices, and is commonly found on optical terminals. It uses a 2.5mm ceramic core, which is different from ST or FC connectors

LC Fiber Optic Movable Connector

The LC connector is a compact fiber optic connector known for its small form factor (SFF), with a size approximately half that of traditional SC, ST, or FC connectors. Its space-saving design makes

FC Optical Fiber Active Connector

The FC optical fiber movable connector is a kind of single-core connector commonly used in optical fiber communication. The external strengthening method is metal sleeve and thread fastening

MU Fiber Optic Active Connector

The MU connector is based on the most commonly used SC connector. Its connector size is about half that of the SC connector and it adopts a push-pull design.

12-core MPO OM3 Fiber Connector

It supports 40G/100G network connection, has high density and high precision, saves wiring space, greatly improves the convenience of network maintenance, and is widely used in backbone networks,

12-core MPO Fiber Connector

Support 40G/100G network connection, high density, high precision, save wiring space, greatly improve the convenience of network maintenance, widely used in backbone network, optical fiber wiring,

8-core MPO Connector

Widely used in high-density wiring of 10G/25G/40G/100G/200G/400G data centers to save wiring space and reduce deployment costs.

Single And Multi-mode Mode Conversion Fiber Optic Patch Cord

Single-to-multimode conversion fiber optic patch cords utilize both single-mode and multi-mode optical fibers to enable single-mode signals to be sent correctly through multi-mode networks.